GEOS 1.1 ADSL2+ x86 Router
A single line ADSL2+ router on x86 architecture. Rebadged in the UK by http://sharedband.com/
Features
- AMD Geode LX800 500MHz processor
- Fully supported by Linux 2.6 and 3.0 Kernels
- DDR400 RAM SO-DIMM (256MB or 512MB)
- 1 x ADSL2+ Port
- 2 x 10/100 Ethernet Ports
- 1 x USB ports
- Mini PCI socket
- Compact Flash socket
- 44-pin IDE header
- RS-232 Serial
- 3 x GPIO LEDs
- 1 x GPIO switch
Hardware Info
| Architecture | ARM |
|---|---|
| bootloader | Coreboot |
| CPU/Speed | AMD Geode LX800 |
| Speed | 500MHz |
| Flash-Chip | Compact Flash |
| Flash size | 128MB - 32GB |
| RAM | 128MB or 256MB |
| Ethernet | 2x 10/100 |
| Internet | 1x ADSL2+ |
| USB | Yes |
| Serial | Yes |
| JTAG | No |
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port
Replace EXAMPLE by real values.
| Serial connection parameters for GEOS 1.1 | EXAMPLE 115200, 8N1 |
|---|
Installation
WIP
OpenWrt can be installed via a web-interface from the existing OEM firmware: System → Upgrade Firmware Alternative installation routines can be found at Installing OpenWrt.
Images/Board
